anchor chain | After Sales Guarantee

Understanding the mechanics of an anchor chain is key to appreciating its role in anchoring operations. When the anchor is dropped, the chain pays out, allowing the anchor to settle on the seabed. As the ship moves backward, the chain gradually extends, forming a catenary - a horizontal curve shaped by the weight and tension of the chain. The catenary acts as a shock absorber, distributing the forces exerted on the anchor and reducing strain on both the anchor and the vessel.

The length of the anchor chain is typically determined by the depth of the water and the size of the ship. In shallow water, a shorter anchor chain may be sufficient, while in deeper water a longer chain may be needed. The chain may also be adjusted by adding or removing links as needed to suit the specific anchoring conditions.

In addition to holding the ship in place, the anchor chain also helps to absorb the shock of waves and other forces that may act on the vessel. It acts as a buffer between the anchor and the ship, helping to reduce the strain on both components. This is especially important in rough seas, where the forces acting on the ship can be very high.

The anchor plays a major role in a vessel and offshore operations. However, it can only function as long as it remains attached to the floating structure.

Considering the tremendous amounts of force applied to the connection between the anchor and the ship during routine berthing or anchoring conditions, conventional methods of securing the anchor will eventually fail under the extensive stress.

The anchor chain refers to the component that attaches the anchor to the boat or structure and is usually referred to as the anchor rode (or anchor cable). It is superior to conventional methods in terms of strength and load-bearing.

Anchor chains are stored in a chain locker set deep within the hull of the vessel. These are ventilated enclosures that are used to store the anchor while it is not in use, and to house the remaining length of the anchor chain while it is deployed. It can be accessed by engineers and personnel for routine checks or long-term maintenance.

Generally, the floor of the chain locker is reinforced, so that it can bear the extra weight of the metal rode. To haul the chain out of the locker, a series of heavy-duty motors and gears are set up on the deck in pairs.