Wire Rope Clips | How to use the wire rope clamp?

How to use the wire rope clamp?
The wire rope clip is also called the rope clip of the wire rope. It is mainly used for the temporary connection of steel wire ropes, the fixing of the rear hand rope when the steel wire rope is passed around the block block, and the fixing of the head of the cable wind rope on the climbing pole. and many more. It is the most widely used wire rope clamp in lifting operations. There are three types of wire rope clamps commonly used: horseback riding style, fist grip style and pressing plate style. Among them, the horse-riding clip is the standard wire rope clip with the strongest connection force and is the most widely used. The pressure plate type is second, the fist type has no base, it is easy to damage the wire rope, and the connection force is also poor, so it is only used in secondary places.

How to use wire rope clips:
1. The steel wire rope clamp should buckle the clip seat on the working section of the steel wire rope, and buckle the U-shaped bolt on the tail section of the steel wire rope.
2. The wire rope clamp shall not be replaced on the wire rope.
3. The distance between wire clamps is equal to 6-7 times the wire rope specification.
4. When tightening the rope clips, it must be considered that each rope clip is reasonably stressed and the rope clip farthest from the collar should not be tightened alone first.
5. The rope clip closest to the collar should be as close as possible to the collar