Top Selling Rope Wire Clamp | Rope Wire Clamp Manufacturer

Wire rope clamps, also known as wire rope clips or cable clamps, are used to secure the ends of wire ropes. One of the main benefits of wire rope clamps is their ability to provide a strong and secure connection without the need for specialized tools or equipment.

Unfortunately, it is not uncommon to see a wire rope clip applied incorrectly. Some of the most common mistakes include:
1、Not torquing to the manufacturer’s expectations
2、Not using the recommended number of clips
3、Incorrect spacing between clips
4、Saddle is on the incorrect end of the rope
5、Incorrect amount of turnback when forming an eye
6、Using the wrong type of clip for the application
7、Not matching the clip size to the wire rope size
8、Failing to cycle the rope and regularly tighten the clips

The primary function of wire rope clamps is to secure the ends of wire ropes. They work by clamping onto the rope and providing a strong and secure connection. Wire rope clamps can be used to create loops or thimbles in the rope, allowing it to be attached to other hardware such as hooks or shackles.

Clips are usually spaced about six wire rope diameters apart to give adequate holding power. They should be tightened before the rope is placed under tension. After the load is placed on the rope, tighten the clips again to take care of any lessening in rope diameter caused by tension of the load. A wire rope thimble should be used in the eye of the loop to prevent kinking.